CAUTION

SPIDER ALERT!

SPIDER AND WEBS

INSIDE BURNER TUBE

If you notice that your grill is getting hard to light or that the flame isn’t as strong as it should be, take the time to check and clean the venturi’s.

VALVE

3.

Remove carryover tubes and burners.

4.

Detach electrode from burner.

 

NOTE: Removal/Detachment method will depend on the

 

burner configuration. See different configurations in

 

illustrations below.

5.

Carefully lift each burner up and away from valve openings.

We suggest three ways to clean the burner tubes. Use the one

easiest for you.

 

(A) Bend a stiff wire (a light weight coat hanger works well)

 

into a small hook. Run the hook through each burner

 

tube several times.

 

(B) Use a narrow bottle brush with a flexible handle (do not

 

use a brass wire brush), run the brush through each

 

burner tube several times.

 

(C) Wear eye protection: Use an air hose to force air into

 

the burner tube and out the burner ports. Check each

 

port to make sure air comes out each hole.

6.

Wire brush entire outer surface of burner to remove food

 

residue and dirt.

7.

Clean any blocked ports with a stiff wire such as an open

CONTROL PANEL

SPIDER WEBS

INSIDE VENTURI

paper clip.

8. Check burner for damage, due to normal wear and corrosion

BURNER

some holes may become enlarged. If any large cracks or

holes are found replace burner.

VERY IMPORTANT: Burner tubes must reengage valve

In some areas of the country, spiders or small insects have been known to create “flashback” problems. The spiders spin webs, build nests and lay eggs in the grill’s venturi tube(s) obstructing the flow of gas to the burner. The backed-up gas can ignite in the venturi behind the control panel. This is known as a flashback and it can damage your grill and even cause injury.

openings. See illustrations at right.

9.Attach electrode to burner.

10. Carefully replace burners.

11.Attach burners to brackets on firebox.

12.Reposition carryover tubes and attach to burners. Replace flame tamers and cooking grates.

Correct

burner-to-valve

engagement

To prevent flashbacks and ensure good performance the burner and venturi assembly should be removed from the grill and cleaned before use whenever the grill has been idle for an extended period.

Storing Your Grill

• Clean cooking grates.

• Store in dry location.

• When LP cylinder is connected to grill, store outdoors in a well-

ventilated space and out of reach of children.

• Cover grill if stored outdoors. Choose from a variety of grill

covers offered by manufacturers.

• Store grill indoors ONLY if LP cylinder is turned off and

Remove screws

Firebox

be tu Carryover

Firebox

burner Electrode bracket

disconnected, removed from grill and stored outdoors.

• When removing grill from storage, follow “Cleaning the Burner

Assembly” instructions before starting grill.

Cleaning the Burner Assembly

Follow these instructions to clean and/or replace parts of burner assembly or if you have trouble igniting grill.

1.Turn gas OFF at control knobs and LP cylinder.

2.Remove cooking grates and flame tamers.

Firebox

tube

Carryover

Firebox burner bracket

Electrode

Pry off electrode with

a flat blade screwdriver

13

Page 13
Image 13
Char-Broil 463411512 Storing Your Grill, Cleaning the Burner Assembly, Very Important Burner tubes must reengage valve

463411512 specifications

The Char-Broil 463411512 is a standout grill designed for both beginner and seasoned grill enthusiasts. With its rugged construction and innovative features, it offers a premium grilling experience that caters to a range of outdoor cooking needs.

One of the main features of the Char-Broil 463411512 is its four-burner system, which provides a total of 36,000 BTUs of cooking power. This impressive heat output ensures that users can achieve high temperatures for searing meats or cooking at lower temperatures for more delicate foods. The burners are made from stainless steel, known for its durability and resistance to corrosion, ensuring that they can withstand the outdoor elements.

The cooking surface of the Char-Broil 463411512 is generous, boasting 425 square inches of primary cooking space along with an additional 150 square inches of warming rack space. This ample grilling area allows for cooking multiple items at once, making it perfect for family gatherings or barbecues with friends. The grill's grates are porcelain-coated, providing excellent heat retention and ensuring that food does not stick, facilitating easier cleanup.

Another notable feature is the integrated TRU-Infrared cooking technology. This unique system helps to eliminate flare-ups and provides even heat distribution across the grilling surface. The TRU-Infrared technology ensures that food cooks evenly, retaining moisture and flavor, which helps to achieve perfectly grilled meats and vegetables every time.

The Char-Broil 463411512 also comes equipped with an electronic ignition system, ensuring reliable starts with just the push of a button. This convenient feature eliminates the need for matches or lighters, making the grilling process smoother and less cumbersome.

Additional characteristics of this grill include side shelves that provide extra workspace for food prep and a side burner that offers versatility for cooking side dishes or sauces. The grill is mounted on heavy-duty wheels, allowing for easy mobility and storage.

Designed with both functionality and aesthetics in mind, the Char-Broil 463411512 features a sleek stainless steel finish that adds a modern touch to any outdoor space. Overall, the Char-Broil 463411512 stands out as a versatile and efficient grill, making it an exceptional choice for anyone looking to enhance their outdoor cooking experience.