ASSEMBLY
Assembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
The following tools are required for assembly: the included allen wrenches | and your own | ||
phillips screwdriver | and a rubber mallet | . |
|
1. Note: Make sure that the two 5/16Ó x 1Ó Screws (76) | 1 |
|
are loose. |
|
|
Tap a 1/2Ó Axle Cap (39) onto one end of the Incline |
| Motor |
| Screw | |
Motor Axle (14). With the help of a second person, |
| |
| 39 | |
raise the Incline Frame (7). Insert the Incline Motor |
| |
|
| |
Axle through one side of the Incline Frame, through |
|
|
a Plastic Spacer (91), through the end of the motor |
|
|
screw, through another Plastic Spacer (91), and |
|
|
through the other side of the Incline Frame. |
| 91 |
Tap a 1/2Ó Axle Cap (39) onto the other end of the | 76 |
|
39 |
| |
Incline Motor Axle (14). |
| |
|
| |
Tighten the two 5/16Ó x 1Ó Screws (76). | 14 | 7 |
| ||
|
| |
2. Raise the Upright (3). Slide the 3/8Ó Washer (94) | 2 |
|
onto the Knob (90). Secure the Upright by tightening |
| |
|
| |
the Knob into the Knob Guide (4). |
|
|
| 3 |
|
| 4 | 94 |
|
| 90 |
3. Secure the Cup Holders (87) in the console plate by | 3 |
|
tapping the Cup Holders into the indicated holes. |
| |
| 87 | |
|
| |
| Console |
|
| Plate |
|
4
