Back to Contents Page
Microprocessor Thermal-Cooling Assembly
Dell™ XPS M140 Service Manual
Removing the Microprocessor
Replacing the Microprocessor
Removing the Microprocessor Thermal-Cooling Assembly
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
1.Follow the instructions in Preparing to Work Inside the Computer.
2.Loosen the three captive screws securing the microprocessor module cover, then remove the cover and set it aside.
1 | microprocessor module cover | 2 | captive screws (3) |
|
|
|
|
|
|
|
|
3.Loosen the four captive screws securing the microprocessor
1 | microprocessor | 2 | captive screws (4) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|