Back to Contents Page
Optical Drive
Dell™XPSM140ServiceManual
About the Device Security Screw
Removing the Optical Drive
Replacing the Optical Drive

About the Device Security Screw

YourDell™computershipswithaCD/DVDdriveinstalledintheopticaldrivebayalongwithanM2.5x8-mm device security screw. If the security screw is not
already installed, it will be packaged separately. When you insert a drive into the bay, you can install the device security screw to prevent the drive from being easily
removed.

Removing the Optical Drive

1. Follow the instructions in Preparing to Work Inside the Computer.
2. Use a Phillips screwdriver to remove the M2.5 x 8-mm device security screw, if installed, from the indention in the bottom of the computer.
3. Insert the screwdriver into the indention and push the notch on the metal tab to release the drive from the bay.
NOTE: You do not need to install the device security screw unless you want to prevent the optical drive from being easily removed.
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To prevent damage to optical drives and other devices, store them in a safe, dry place when they are not installed in the computer. Avoid pressing
down on them or placing heavy objects on top of them.
1
indention
M2.5 x 8-mm device security screw (optional)