Char-Broil 4651330 manual Propane Cylinder not included

Assembly (Con’t.)

5

-Before assembly, inspect Regulator (J) for damage, dirt or debris accumulation. Clean out if present.

-With knob pointing down, insert Regulator/Valve (J) into end of Burner (F).

Notch in Regulator/Valve (J) MUST engage dimple in end of Burner (F).

-Once Regulator/Valve (J) has completely engaged Burner (F), turn Regulator/Valve (J) clockwise to lock in position with knob pointing up.

Rotate clockwise to lock

Regulator/Valve (J)

Regulator/Valve (J)

Locked in position

6

-Remove cap from end of Propane cylinder (sold separately). Cap should be kept on cylinder when not in use to prevent dirt and debris from entering Regulator/Valve (J). Check end of cylinder attachment for dirt and debris. Clean out if necessary.

-Insert threaded end of Propane Cylinder into Regulator/Valve (J) and hand-tighten. DO NOT USE TOOLS! Over tightening can damage threads on Regulator/Valve (J).

-Perform a leak test.

Propane Cylinder (not included)

11