Char-Broil 5101194 manual Assembly

Assembly

Step 1

Slide tool hooks onto one of the towel bars prior to assembly. Attach each towel bar using two 1/4-20x3/4” machine screws.

DO NOT LIFT UNIT USING TOWEL BARS.

Towel bar 55700667

1/4-20x3/4” Machine Screw

1/4-20x3/4”

Machine Screw

Qty: 4

Tool hook

Wrap/Body 55700670

Step 2

Feed burner tube through center hole of heat shield. Align the three threaded studs on bottom of burner with small holes in heat shield. Make sure electrode passes through electrode hole. Secure burner beneath heat shield using three #10-24 hex/keps nuts. Attach ignitor wire to electrode.

Burner assembly 55700664

#10-24

Hex/Keps Nut

Qty: 3

Electrode

#10-24 Hex/Keps Nut

Ignitor Wire 55700664

13