Do not fully tighten screws until is complete

FIRST, GET A HELPER! This unit is heavy and requires a second person for lifting and moving. NEXT, pick a suitable

1 location to work. Open the carton and slit the corners so that the carton lays flat. This will give you a protective work surface during assembly.

TO BEGIN ASSEMBLY, build two leg assemblies by sliding the long leg sections into the short leg sections.

Short leg section

Long leg section

2	Attach leg braces to the outside of one leg assembly using #10-24x1-3/4” screws and #10-24 flange nuts. Make sure
	slotted (oval) hole is toward bottom of leg. DO NOT FULLY TIGHTEN screws until Step 6 is complete.

Leg brace

Do not fully tighten screws until Step 6 is complete.

Slotted

hole