Char-Broil 7201560 owner manual Bolts as shown below, Are included with ignitor

7	Attach Firebox Top Assembly to Firebox Bottom Assembly using eight 1/4-20x3/4”hex-head
	bolts as shown below.

Firebox Top Assembly

Firebox Bottom Assembly

8	NOTE: Smoker chamber and firebox doors not pictured for clarity.
	Diamond FireTM Plate Installation - For models without Diamond FireTM ignitor accessory,
	part number 22504850.
	TM
	For models that feature the Diamond Fire ignitor accessory, supplemental instructions
	are included with ignitor.
	First, locate the cover plate in the hardware box. At the bottom right end of the	Firebox
	firebox there is an opening for the Diamond FireTM ignitor accessory. Install the

cover plate over the opening using two #8-32x1/2” screws and #8-32 lock nuts. Second, align the hole pattern on the firebox with the pattern on the

smoker chamber. The firebox should be slightly offset from the smoker chamber. Attach using six 1/4-20x3/4”hex-head bolts and flat washer inside firebox and 1/4-20 flange nuts inside smoker chamber.

Firebox

Cover Plate