Chatsworth Products RIM-600 user manual Adding a Host, Connecting to a Host, Deleting a Host

RIM-600 Manual

Adding an Enterprise Group

From the ConsoleView menu, click on Enterprise and select Add Enterprise Group. In the left-hand column, a New Enterprise Group will appear. When you connect to the host, the Enterprise Name will update.

Deleting an Enterprise Group

If at any time you wish to delete an Enterprise group, click to highlight the Enterprise Group you would like to delete, select Enterprise from the main menu and choose Delete Enterprise Group.

Adding a Host

Right-click on the words IP Unknown below the enterprise name and select Set IP Address. Enter the IP address for your RIM-600 Host and click OK. The software will prompt you for a username and password to log in. For new units, the default username is admin and the default password is rim600. The software will now attempt to connect to your RIM-600 Host. A progress bar will show the software retrieving information from the Host.

Default Username: admin

Default Password: rim600

Note: Do not save the default username and password, because it will be deleted automatically once a Master System Administrator profile is configured.

Figure 7: Entering the Host address

To see the programming, inputs, and accessories associated with the host, click in the box beside your enterprise group. The tree hierarchy will appear beneath the Host.

Figure 8: Host Tree

Connecting to a Host

If you have a Host set up already, you can connect to it in one of two ways: Either right-click on the Host and select Connect from the dropdown menu, or double-click on the Host in the hierarchy. Both methods will bring up the prompt form where you type in your username and password to connect to the Host.

Deleting a Host

To delete a Host, right-click on the Host you would like to delete and select Delete Host from the contextual menu.

44