EN | COLORdash™ Par-Tri 18VW QRG |
AC Power This product has an auto-ranging power supply that can work with an input voltage range of 100~240 VAC, 50/60 Hz.
Power Linking You can link up to 15 COLORdash™ Par-Tri 18VW products at 120 VAC or 28 at 230 VAC. Never exceed this number. Power linking cords can be purchased separately.
AC Plug | | Connection | Wire (U.S.) | Wire (Europe) | Screw Color |
| | AC Live | Black | Brown | Yellow/Brass |
| | AC Neutral | White | Blue | Silver |
Fuse | | AC Ground | Green/Yellow | Green/Yellow | Green |
1. | Disconnect this | product from power. | |
Replacement | 2. | Using a flat-head screwdriver, unscrew the fuse holder cap from the |
| | housing. | | | |
3.Remove blown fuse and replace with a good fuse of the same type and rating.
4.Screw the fuse holder cap back in place and reconnect power.
DMX Linking The COLORdash™ Par-Tri 18VW will work with a DMX controller using a regular DMX serial connection. A DMX Primer is available from www.chauvetpro.com.
DMX Connection The COLORdash™ Par-Tri 18VW uses a regular DMX data connection for its DMX personalities: 2 Ch, 3 Ch, and 7 Ch. See the User Manual to connect and configure for DMX operation.
Master/Slave The COLORdash™ Par-Tri 18VW uses the DMX data connection for its Connection Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.