Chauvet 260-LED manual Menu Options, Programming Levels Description

Q-Wash™ 260-LED QRGEN

Menu Options

Main Level	Programming Levels		Description
	ADDRESS	001~512	Selects a starting DMX address
	RESET	YES	Resets product’s custom settings
		NO
		HIGH	Select the fan’s operation mode
		NORMAL	NOTE: Product’s controller will force the fan to
	FANS	LOW	High if the product’s internal temperature
		AUTO	becomes too high, despite any manual or DMX
			setting
		DMX512	Selects DMX running mode
		AUTO1	Selects the first automatic program
		AUTO2	Selects the second automatic program
	RUN	CUSTOM	Selects the user customizable program
INTRO		SOUND1	Selects the first sound program
		SOUND2	Selects the second sound program
		SLAVE	Selects the Slave running mode
		TEST	Starts the product’s test sequence
	CHANNELS	BASIC	Selects the 9-channel DMX mode
		ADVANCED	Selects the 12-channel DMX mode
	DISPLAY	60_CLOSE	Turns off display after 60 seconds
		BRIGNT	Keeps the display on
	KEYLOCK	YES	Activates/deactivates the control panel password
		NO
		DIMMER4~1	Slow (DIMMER4) to fast (DIMMER1) dimmer
	DIMMER		curves
		DIMMER0	Linear dimmer
	INFO	Edition	Shows the installed S/W version
	PAN	NORMAL/	Defines the pan direction
	TILT		Defines the tilt direction
INVERT		REVERSE
	DIMMER		Defines the dimmer fader direction
	USE	YES	Activates the changes
		NO
	P/START		Sets the pan start point
	P/FINISH	000~255	Sets the pan end point
RANGE	T/START		Sets the tilt start point
	T/FINISH		Sets the tilt end point
	USE	YES	Activates the changes
		NO
	BLACKD	YES	Activates the move-in black delay (3 s)
		NO
	RESET	DMX	Allows controller to reset product
		SYSTEM	The control panel can reset the product
	POWER	NORMAL	LEDs illuminate at normal or high intensity
SPECIAL		HIGH
	COLOR	UC	Output matches older products
		RGBTOW	Output set by RGBTOW
		OFF	Output defined by RGBW faders
	FAN	DMX	Allows controller to set fan speed
		SYSTEM	Control panel sets fan speed
	DMXERROR	SAVE	Save the last look when DMX is lost
		BLAK	Goes to black when DMX is lost

4