Mounting
Orientation
The SlimPAR™ 56 may be mounted in any position, provided there is adequate room for ventilation.
Rigging
Be sure that the structure onto which you are mounting this product can support its weight. Please see the “Technical Specifications” section of this manual for weight information.
Mount the fixture securely. You can do this with a screw, a nut, and a bolt. You could also use a mounting clamp if rigging this product onto a truss. The bracket has a hole that is 13 mm in diameter, which is appropriate for this purpose.
When mounting this product overhead, always use a safety cable.
Always consider ease of access to the unit for maintenance and programming purposes before deciding on a location for this product
When power linking multiple fixtures, always consider the length of the power linking cable and mount the fixtures close enough from each other to accommodate for this.
The bracket knobs allow for directional adjustment when aiming the fixture to the desired angle. Do not use tools to loose or tighten the bracket knobs. Doing otherwise could damage the knobs.
Primary bracket
Secondary bracket
Mounting Diagram
Bracket adjustment knob
SlimPAR™ 56 User Manual (Rev. 04) | Page 7 of 17 |
