Data Cabling

To link fixtures together you must obtain data cables. You can purchase CHAUVET certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create your own cable please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic interference.

DMX Data Cable

Use a Belden© 9841 or equivalent cable which meets the specifications for EIA RS-485 applications. Standard microphone cables cannot transmit DMX data reliably over long distances. The cable will have the following characteristics:

Type:

shielded, 2-conductor twisted pair

Maximum capacitance between conductors:

 

30 pF/ft

Maximum capacitance between conductor and shield:

55 pF/ft

Maximum resistance:

 

20 ohms/1000 ft

Nominal impedance:

 

100 ~ 140 ohms

Cable Connectors

Cabling must have a male XLR connector on one end and a female XLR connector on the other end.

DMX

connector

 

 

config

 

 

 

COMMON

 

1

DMX +

INPUT

3

 

 

2

DMX -

 

 

 

1

Resistance 120 ohm

 

1/4W between pin 2

 

3

(DMX -) and pin 3

 

2

(DMX +) on the

 

 

output of the last

 

 

fixture.

1

OUTPUT

 

3

 

2

To avoid signal transmission

 

problems and interference, it is always advisable to connect a DMX signal terminator.

Caution Do not allow contact between the common and the fixture’s chassis ground. Grounding the common can cause a ground loop, and your fixture may perform erratically. Test cables with an ohmmeter to verify correct polarity and to make sure the pins are not grounded or shorted to the shield or each other.

3-Pin to 5-Pin Conversion Chart

Note

If you use a controller with a 5-pin DMX output connector, you will need to use a 5-pin to 3-pin

 

adapter. CHAUVET Model No: DMX5M, or DMX5F.

 

The chart below details a proper cable conversion:

3-PIN TO 5-PIN CONVERSION CHART

Conductor

3 Pin Female (Output)

5 Pin Male (Input)

 

 

 

Ground/Shield

Pin 1

Pin 1

 

 

 

Data ( - ) signal

Pin 2

Pin 2

Data ( + ) signal

Pin 3

Pin 3

Not used

 

Pin 4

Not used

 

Pin 5

COLORado™ 6 User Manual

12

7/1/2009 4:46 PM

Page 12
Image 12
Chauvet 6 user manual Data Cabling, DMX Data Cable, Cable Connectors, Pin to 5-Pin Conversion Chart, Conductor

6 specifications

The Chauvet 6 is a cutting-edge lighting fixture designed to elevate the experience for events ranging from concerts and theaters to corporate presentations and parties. Aimed at both professionals and enthusiasts, the Chauvet 6 incorporates advanced technologies and innovative features that ensure stunning visuals and reliable performance.

One of the standout characteristics of the Chauvet 6 is its incredible brightness, powered by high-quality LEDs that provide vibrant colors and exceptional clarity. The fixture typically boasts multiple LED sources that can produce a wide spectrum of hues, allowing users to create dynamic lighting effects that energize any space. With its impressive lumen output, the Chauvet 6 can easily illuminate large venues or outdoor events, making it a versatile choice for various applications.

In terms of control options, the Chauvet 6 offers flexibility and ease of use. It supports DMX protocols, providing users with the ability to synchronize multiple fixtures for cohesive light shows. Additionally, many models come equipped with built-in programs that allow for stand-alone operation, eliminating the need for complex setup at smaller events. The intuitive interface and user-friendly controls enable both seasoned lighting designers and novices to craft elaborate lighting setups quickly.

Another notable feature of the Chauvet 6 is its durability and reliability. Designed with robust materials, the fixture can withstand the rigors of regular transport and usage in demanding environments. Many units feature weather-resistant casings, making them suitable for outdoor events, where they can endure changing conditions without compromising performance.

The Chauvet 6 incorporates advanced thermal management technology, which ensures that the LEDs remain at optimal operating temperatures. This not only enhances the lifespan of the fixture but also maintains color accuracy and intensity. Furthermore, the energy-efficient design minimizes power consumption, aligning with today’s eco-conscious standards.

With its mix of innovation, versatility, and performance, the Chauvet 6 stands out as a premier choice for lighting designers. Whether enhancing a stage production or adding flair to a wedding, this lighting fixture guarantees an unforgettable visual experience for audiences and participants alike. As the demand for high-quality, dynamic lighting increases, the Chauvet 6 continues to lead the way with its remarkable features and dependable technology, making it a staple in the world of event production.