Art-Net™
Connection
Kling-Net
Connection
Art-Net™/Kling-Net Connection Diagram
Art-Net™ is an Ethernet protocol that uses TCP/IP to transfer large amounts of DMX512 data over a network. Art-Net™ uses the Neutrik® etherCON® RJ45 connection. An Art-Net™ Primer is available from www.chauvetpro.com. Art-Net™ Designed by and Copyright Alderamin Group Ltd.
Kling-Net is a network protocol to allow auto configuration of display devices over ethernet. Kling-Net uses the Neutrik® etherCON® connection. Refer to the ArKaos MediaMaster™ software manual for detailed instructions on installing and programming this product using this protocol.
NOTE: Do not use WAN port!
Router
Computer/Controller
(running Art-Net™
or Kling-Net protocol)To other Art-Net™
or
Kling-Net
devices
Factory Reset This procedure allows you to reset the product to its original factory settings.
1.Unplug the NEXUS™ Aw 7x7 from power.
2.Press and hold <MENU/ESC> and <ENTER> simultaneously while plugging the NEXUS™ Aw 7x7 back into power.
3.Release <MENU/ESC> and <ENTER>.