Chauvet Camera Accessories 1. BEFORE YOU BEGIN

1. BEFORE YOU BEGIN

¾ 1 x Vue™ 4.1

¾ Power Cord

¾ Warranty Card

¾ User Manual

Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that

all parts are present, and have been received in good condition. Notify the shipper immediately and

retain packing material for inspection if any parts appear damaged from shipping or the carton itself

shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture

must be returned to the factory, it is important that the fixture be returned in the original factory box

and packing.

This fixture has an auto-switching power supply that can accommodate a wide range of input

voltages. The only thing necessary to do before powering on the unit is to make sure the line voltage

you are applying is within the range of accepted voltages. This fixture will accommodate between

100V and 240V AC 50-60 Hz. All fixtures must be powered directly off a switched circuit and cannot

be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is

used solely for a 0% to 100% switch.

General Information CHAUVET

3000 North 29th Court

Hollywood, FL 33020

voice: 954.929.1115

fax: 954.929.5560

toll free: 800.762.1084

Technical Support CHAUVET

3000 North 29th Court

Hollywood, FL 33020

voice: 954.929.1115 (Press 4)

fax: 954.929.5560 (Attention: Service)

World Wide Web www.chauvetlighting.com

Vue™ 4.1 User Manual 3 7/11/2008 11:57 AM