Mounting
Orientation
The Cubix™ may be mounted in any position, provided there is adequate room for ventilation around it.
Rigging
Be sure that the structure onto which you are mounting this product can support its weight. Please see the “Technical Specifications” section of this manual for weight information.
Make sure to mount the fixture securely to a rigging point, whether an elevated platform or a truss.
When rigging this product onto a truss, you should use a mounting clamp of appropriate weight capacity. The bracket has a 13 mm hole, which is appropriate for this purpose.
When mounting this product overhead, always use a safety cable.
Before deciding on a location for this product, always make sure that it will be easy to access the unit for maintenance and programming purposes.
When power linking multiple fixtures, you must always consider the length of the power linking cable and mount the fixtures close enough for the cable to reach them.
The bracket knobs allow for directional adjustment when aiming the fixture to the desired angle. Only loosen or tighten the bracket knobs using your bare hands. Using tools could damage the knobs.
Hanging bracket
Mounting Diagram
Bracket knob
Cubix™ User Manual (Rev. 01a) | Page 7 of 18 |
