Chauvet DERBY X user service General Troubleshooting, Symptoms Possible Solutions

Models: DERBY X

1 20
Download 20 pages 8.63 Kb
Page 15
Image 15

General Troubleshooting

Symptom(s)

Possible Solution(s)

 

 

 

1 or more LED’s are not

Clean the fixture regularly to avoid any such failure. This fixture is

convection cooled, which means that if the surface is kept clean and free

illuminating

of debris, then proper cooling will be allowed to occur

 

 

An LED may have failed, resulting in an open circuit. In this event, all of

 

the red, green, or blue in a single module will no longer illuminate. This

 

does not mean that all of the LEDs have failed, but the circuit is wired in

 

series.

 

 

An LED may have failed, resulting in a short circuit. In this event, only

 

the single LED which has failed will no longer function. This does not

 

mean that all of the LEDs have failed, but the circuit is wired in series.

 

-Note: In the event of LED failure, a replacement LED PCB assembly

 

may be purchased directly from CHAUVET

Part#: P222-DERBYX

1 or more LED’s are producing

Check that the lens assembly is installed properly. If the lens assembly

is not aligned properly over the LEDs, then they will not project fully

very low output

-See section on Lens Assembly Installation

 

 

-Note: In the event of LED failure, a replacement LED PCB assembly

 

may be purchased directly from CHAUVET

Part#: P222-DERBYX

Breaker/Fuse keeps blowing

Check total load placed on the electrical circuit

 

 

Check for a short in the electrical wiring: internal and/or external

Device has no power

Check device’s fuse (internal)

 

 

Check for power on Mains

 

 

-Note: In the event of autoswitching transformer failure, the unit can be

 

sent in for repair; however, a replacement part can be ordered directly

 

from CHAUVET

Part#: P140-DERBYX

Fixture is not responding to

Check Control Panel settings for correct addressing

DMX

 

 

 

Check DMX cables

 

 

Check polarity switch settings on the controller

 

 

Check cable connections

 

 

Call service technician

 

 

See page #10 for proper settings to operate in DMX mode

 

-Note: In the event of Master PCB failure, a replacement PCB can be

 

ordered directly from CHAUVET

Part#: P172-DERBYX

Loss of signal

Use only DMX cables

 

 

Install terminator

 

 

Note: Keep DMX cables separated from power cables or black lights

Stand alone operation problem

See page #8 & #10 for details on proper settings and connections

 

 

 

If you still have a problem after trying the above solutions, please contact

CHAUVET Technical Support at the location on the next page.

Derby X™ User Manual

15

7/14/2008 1:27 PM

Page 15
Image 15
Chauvet DERBY X user service General Troubleshooting, Symptoms Possible Solutions

DERBY X specifications

The Chauvet Derby X is a dynamic lighting fixture designed for both professional and amateur lighting enthusiasts. Known for its versatility and powerful performance, the Derby X is a favorite among DJs, event planners, and live performers looking to create vibrant and engaging light displays.

One of the standout features of the Derby X is its dual rotating beams, which produce captivating multi-colored projections that can fill any venue with excitement. The fixture is equipped with 8 LED RGB (red, green, blue) lights that allow for a broad spectrum of color mixing. This capability enables users to achieve stunning visual effects that can enhance any atmosphere, be it a dance floor or a stage performance.

The Derby X incorporates advanced technologies to ensure ease of use and flexibility. It can be operated in multiple modes including standalone, sound activation, and DMX control. Users can easily connect multiple fixtures together in a master/slave configuration for synchronized lighting effects, adding an extra layer of coherence to an event's visual presentation.

Another significant characteristic of the Derby X is its user-friendly interface. With intuitive controls, even those with limited experience in programming lights can quickly set up and operate the fixture. The inclusion of a built-in microphone enables the light to react to music, allowing for spontaneous and rhythm-based performances that can captivate audiences.

The design of the Chauvet Derby X is both robust and portable, making it suitable for venues of all sizes. Its lightweight construction ensures that it is easy to transport and set up, while its durable build ensures it can withstand the rigors of road use.

Chauvet places a strong emphasis on energy efficiency, and the Derby X is no exception. The fixture uses highly efficient LED technology, which not only reduces power consumption but also extends the life of the light source. This makes it an economical choice for venues that frequently utilize lighting effects.

In summary, the Chauvet Derby X is a powerful and flexible lighting fixture that offers a plethora of features designed to enhance the visual experience of any event. With its combination of vibrant LED colors, advanced control options, and sturdy design, it is an essential tool for anyone looking to create enthralling lighting displays. Whether for a club, concert, or an intimate gathering, the Derby X is sure to elevate the ambiance and captivate audiences.