Mounting
ORIENTATION
This fixture may be mounted in any position provided there is adequate room for ventilation.
RIGGING
It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding the desired position, retighten both knobs.
•When selecting installation location, take into consideration lamp replacement access and routine maintenance.
•Safety cables should always be used.
•Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation.
Hanging Clamp
Note!
Clamp is sold separately.
4.OPERATING INSTRUCTIONS
Navigating the Control Panel
Access control panel functions using the four panel buttons located directly underneath the LCD Display. NOTE: The display will turn off after 10 seconds if no buttons are pushed.
Button | Function | |
|
| |
|
| |
<MODE/ESC> | Used to access the menu or to scroll | |
through | ||
| ||
<UP> | Scrolls through menu options in ascending | |
order | ||
| ||
<DOWN> | Scrolls through menu options in descending | |
order | ||
| ||
<ENTER> | Used to select and store the current menu | |
or option within a menu | ||
| ||
|
|
|
| UP |
CONTROL PANEL | MODE |
|
| /ESC | ENTER |
| ||
|
|
|
DOWN
DMX Signal Indicator
The Control Panel LED Display shows the menu items you select from the menu map on the next page. When a menu function is selected, the display will show immediately the first available option for the selected menu function. To select a menu item, press <ENTER>.
Press the <MODE/ESC> button once to activate the control panel. Pressing the <MODE/ESC> button again will scroll through the different
Stage Mover Manual | 10 |
