Chauvet DMX512 user service Menu Map Menu Functions, User Configurations

Menu Map

Menu Functions

MENU OPTION

DESCRIPTION

DMX: The fixture will be controlled by a DMX signal coming from a DMX controller. The starting address must be selected, and can be set using the up and down buttons.

Stand Alone – Automatic: The built in programs will trigger automatically to a pre- programmed speed time.

Sound Active – Master Unit: Sets the fixture to Master status for Master-Slave operation and the built in programs will be triggered by the sound. No data link is required; all fixtures can be set to this mode for Stand-alone operation.

Slave Unit: Sets the fixture to run in sync with the Master. You must set the first fixture in the data link to “Master” otherwise nothing will happen.

User Configurations

TO SET THE PAN TO INVERTING OR NON-INVERTING:

1)Press <MODE/ESC> until is displayed. Use the <UP> and <DOWN> buttons to

scroll through the two options. is non-inverting; is inverting.

Stage Mover Manual 11 2007-04-13/09:39