SETUP
Power
Warning! | Verify that the power indicator label on your unit matches the line voltage applied. | |
| All fixtures must be connected to circuits with a suitable Earth Ground. | |
| ∙ To determine the power requirements for a particular fixture, see the label affixed to the back plate | |
| ∙ | of the fixture or refer to the fixture’s specifications chart. |
| A fixture’s listed current rating is its average current draw under normal conditions. | |
| ∙ | All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat |
|
| (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used solely for a 0% |
| ∙ | to 100% switch. |
| Before applying power to a fixture, check that the source voltage matches the fixture’s | |
| ∙ | requirement. |
| All fixtures must be connected to circuits with a suitable Earth Ground. | |
Pow er Cabl e Conf igu ratio n
CABLE
BROWN
BLUE
YELLOW/GREEN
Mounting
PIN
Live
Neutral
Earth
INTERNATIONAL
L
N
EG (Ground)
Ori ent at ion
Optional Hanging Clamp
This fixture can be mounted on a truss using a clamp in any position.
Rigg ing
The fixture includes a mounting yoke to which 1 rigging clamp can be bolted.
1.Align the clamp screw with the center hole on the yoke and tighten.
2.Verify the structure can hold 10 times the weight of all
3.Adjust the angle on the yoke arm as necessary.
6 |
