Power Management Setup
Field | Description | Value |
|
|
|
ACPI Suspend | Use this item to define how your system suspends. Default value is S3 | S3 (STR) |
Mode | (STR), the suspend mode is suspend to RAM, i.e., the system shuts | S1 (POS) |
| down with the exception of a refresh current to the system memory. |
|
|
|
|
Deep Power Off | Enables or disables compliance to the | Enabled |
Mode | Directives (EuP Lot 6). | Disabled |
|
|
|
Power On by RTC | Enables or disables the system to wake up from a | Enabled |
Alarm | when an RTC alarm occurs. | Disabled |
|
|
|
Power On by PCIE | Enables or disables the system to wake up from a | Enabled |
Devices | when an event occurs on an installed PCI Express device. | Disabled |
|
|
|
Power On by PCI | Enables or disables the system to wake up from a | Enabled |
Devices | when an event occurs on an installed PCI device. | Disabled |
|
|
|
Power On by | Enables or disables the system to wake up from a | Enabled |
Modem Ring | when a modem signal is received. network message | Disabled |
|
|
|
Power On by | Enables or disables the system to wake up from a | Enabled |
Onboard LAN | when the onboard LAN controller received a network message. | Disabled |
|
|
|
Wake Up by PS/2 | Enables or disables the system to wake up from a | Enabled |
KB/Mouse | when a PS/2 keyboard or mouse is used. | Disabled |
|
|
|
Wake Up by USB | Enables or disables the system to wake up from a | Enabled |
KB/Mouse | when a USB keyboard or mouse is used. | Disabled |
|
|
|
Restore On AC | Select the power state when an AC power loss occurs. | Power Off |
Power Loss | • Off - The computer remains off until the power button is pressed. | Power On |
| • Last State - The computer reverts to the last power state before the | Last State |
| power loss occurred. |
|
| • On - The computer switches back on after the AC power loss. |
|
|
|
|
Aspire Z3750 / Z3751 / Z5750 / Z5751 AIO Computer Service Guide | 19 |