4.Gently lift the processor out of its socket.
IMPORTANT When installing a processor:
•Note the golden arrow on the corner to make sure the processor is properly oriented over the socket.
•Moisten a soft cloth with isopropyl alcohol and clean the processor die to remove any thermal grease residue. Wipe the die surface several times to make sure that no particles or dust contaminants are evident. Allow the alcohol to evaporate before continuing. Apply just enough thermal grease to evenly coat the surface of the processor die.
Removing the Memory Modules
1.Remove the wall mount plate by following the procedure described on page 40.
2.Open the holding clips securing the memory modules (a), then remove the memory modules from the DIMM slots (b).
Aspire Z3750 / Z3751 / Z5750 / Z5751 AIO Computer Service Guide | 51 |
