HOW TO USE WAND
Risk of injection or injury to person. Do not direct discharge stream toward persons, unprotected skin, eyes, or with any
pets or animals. Serious injury can occur.
DO NOT attempt to change nozzles while pressure washer is running. Turn engine off before changing nozzles.
Your pressure washer is equipped with four spray nozzles. Each is color coded and delivers a specific spray pattern for a particular cleaning purpose. The size of the nozzle determines the size of the fan spray and the pressure out of the nozzle. The 0º, 15º, and 40º nozzles are high pressure nozzles. The chemical nozzle is a low pressure nozzle.
The nozzles are housed in receptacles on the panel of the pressure washer handle. Color squares on the panel identify nozzle location and spray pattern.
To change quick connect nozzles:
1.Pull quick connect coupler back and insert nozzle.
2.Release quick connect coupler and twist nozzle to make sure it is secure in coupler.
Risk Of Injury. Ensure nozzle is completely inserted in QC socket, and QC snap ring is
fully engaged (forward) before squeezing gun trigger.
0º nozzle - Red. This nozzle delivers a pinpoint stream and is extremely powerful. It covers a very small area of cleaning. This nozzle should only be used on surfaces that can withstand this high pressure such as metal or concrete. Do not use on wood.
15º nozzle - Yellow. This nozzle delivers a powerful 15 degree spray pattern for intense cleaning of small areas. This nozzle should only be used on areas that can withstand the high pressure from this nozzle.
40º nozzle - White. This nozzle delivers a 40 degree spray pattern and a less powerful stream of water. It covers a wide area of cleaning. This nozzle should be used for most general cleaning jobs.
Chemical nozzle - Black. This nozzle is used to apply chemicals or cleaning solutions. It has the least powerful stream.
D25802 | 10- ENG |
