Porter-Cable PCV2250 Hazard, What Can Happen, How To Prevent It, Risk To Breathing

HAZARD

RISK TO

BREATHING

RISK OF INJURY OR PROPERTY DAMAGE WHEN TRANSPORTING OR STORING

RISK TO FLUID

INJECTION

RISK OF

CHEMICAL

BURN

WHAT CAN HAPPEN

•Breathing exhaust fumes will cause serious injury or death!

•Some cleaning fluids contain sub- stances which could cause injury to skin, eyes, or lungs.

•Fuel or oil can leak or spill and could result in fire or breathing hazard, serious injury or death can result. Fuel or oil leaks will dam- age carpet, paint or other surfaces in vehicles or trailers.

•Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

•Injuries can result if system pressure is not reduced before attempting maintenance or disassembly.

•Use of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.

HOW TO PREVENT IT

•Operate pressure washer in a well ventilated area. Avoid enclosed areas such as garages, basements, etc.

•Never operate unit in a location occupied by humans or animals.

•Use only cleaning fluids specifically recommended for high pressure washers. Follow manufacturers recommendations. Do not use chlorine bleach or any other corrosive compound.

•If pressure washer is equipped with a fuel shut-off valve, turn the valve to the off position before transporting to avoid fuel leaks. If pressure washer is not equipped with a fuel shut-off valve, drain the fuel from tank before transporting. Only transport fuel in an OSHA approved container. Always place pressure washer on a protective mat when transporting to protect against damage to vehicle from leaks. Remove pressure washer from vehicle immediately upon arrival at your destination.

•Never place hands in front of nozzle.

•Direct spray away from self and others.

•Make sure hose and fittings are tightened and in good condition. Never hold onto the hose or fittings during operation.

•Do not allow hose to contact muf- fler.

•Never attach or remove wand or hose fittings while system is pres- surized.

•To relieve system pressure, shut off engine, turn off water supply, and pull gun trigger until water stops flowing.

•Use only hose and high pressure accessories rated for pressure higher than your pressure washer's p.s.i.

•Do not use acids, gasoline, kero- sene, or any other flammable materials in this product. Use only household detergents, cleaners and degreasers recommended for use in pressure washers.

•Wear protective clothing to protect eyes and skin from contact with sprayed materials.

D25802 4- ENG