9/17/2007 12:27 PM
Figure 1 - AC Voltage Switch

1.BEFORE YOU BEGIN

What is included

¾1 x LX5™

¾Power Cord

¾Warranty Card

¾User Manual

Unpacking Instructions

Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing.

AC Power

To determine the power requirements for a particular fixture, see the label affixed to the back plate of the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating is its average current draw under normal conditions. All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used solely for a 0% to 100% switch. Before applying power to a

fixture, check that the source voltage matches the fixture’s requirement. Check the fixture or device carefully to make sure that if a voltage selection switch exists that it is set to the correct line voltage you will use.

Warning!

Verify that the voltage select switch on your unit matches the

 

 

line voltage applied. Damage to your fixture may result if the

 

 

line voltage applied does not match the voltage indicated on

Not all fixtures have a voltage

 

the voltage selector switch. All fixtures must be connected to

select switch. Please be sure to

 

circuits with a suitable Earth Ground.

connect to the proper voltage.

 

 

Contact Us

 

 

 

 

 

World Wide

 

 

 

 

General Information

Chauvet Lighting

 

 

 

3000 North 29th Court

 

 

 

Hollywood, FL 33020

 

 

 

voice:

954.929.1115

 

 

 

fax:

954.929.5560

 

 

 

toll free: 800.762.1084

 

 

Technical Support

Chauvet Lighting

 

 

 

3000 North 29th Court

 

 

 

Hollywood, FL 33020

 

 

 

voice:

954.929.1115 (Press 4)

 

 

 

fax:

954.929.5560 (Attention: Service)

 

 

World Wide Web

www.chauvetlighting.com

 

LX5

3

Page 3
Image 3
Chauvet LX5 user manual Before YOU Begin, What is included, Unpacking Instructions, AC Power, Contact Us

LX5 specifications

The Chauvet LX5 is a versatile lighting fixture designed for a range of professional applications, from concert stages to corporate events. Built to enhance the visual experience, the LX5 combines cutting-edge technology with intuitive user interfaces, making it a favorite among lighting designers and technicians.

At the core of the LX5 is its advanced LED technology. Featuring a bright output, this fixture utilizes high-quality RGBW LEDs that produce vivid colors and deep saturation. The LX5 is capable of generating a broad spectrum of hues, making it ideal for creating dynamic and engaging lighting designs. With an exceptional color mixing ability, it can smoothly transition between colors, which is vital for delivering visually appealing performances.

One of the standout features of the LX5 is its sleek, streamlined design. The low-profile housing allows it to be integrated easily into various setups, ensuring that creative lighting can be achieved without overwhelming the stage or event space. Its lightweight construction also facilitates easy transport and setup, making it ideal for mobile applications.

The LX5 comes equipped with various control options, including DMX, allowing for precise and synchronized lighting effects. This makes it easy to coordinate the LX5 with other lighting fixtures in a comprehensive rig. The fixture also supports standalone operation, featuring built-in programs and automated features that allow users to create captivating light displays without a complex setup.

Durability is another critical characteristic of the LX5. Its robust build quality is designed to withstand the rigors of regular use, ensuring reliability in high-pressure environments. Additionally, the fixture includes a quiet fan and thermal management system, allowing it to operate efficiently, even during extended periods.

In terms of versatility, the LX5 excels with its various mounting options, including floor, truss, and bracket mounts. This flexibility allows lighting professionals to adapt the fixture to different venues and configurations, enhancing the overall lighting design.

Overall, the Chauvet LX5 is a powerful lighting solution that combines advanced LED technology with user-friendly features. Its vibrant color output, robust design, and versatile control options make it a valuable tool for any lighting professional looking to create stunning visual experiences. Whether for a high-energy concert, a dramatic theatrical performance, or a polished corporate function, the LX5 delivers exceptional performance and creativity.