Chauvet Q-Roll 150, Q-Scan 150 user manual Operating Instructions, Control Panel Functions

OPERATING INSTRUCTIONS

Control Panel

On the control panel you can set the DMX address, set the fixture to Master/Slave mode, reset the fixture and change fixture personality traits.

Control Board

			
Enter	Choose	Up	Down

[Enter] Confirms selection [Choose] Access to main menu

[Up] Toggle menu items in a forward direction [Down] Toggle menu items in a reverse direction

Control Panel Functions

FUNCTION	OPTIONS			NOTES
	/
				Pan invert
	/
				Tilt invert
	/
				Fixture reset
	/
				Stand Alone (Sound-Active)
	/
				Stand Alone (Auto Run)
	/
				Master Mode
		/		(-n) to Enable Channel 7
				Pan/Tilt Speed)
	/			Display invert
	~
				DMX channel addressing

-y: Activates setting

-n: Disables, skips or selects alternative setting

Applying changes to Functions (Quick Instructions)

Unless other wise stated changes in the control panel can be applied in the following manner.

1.Press [Choose] button repeatedly until the display reads the menu function you wish to change as illustrated in the table above in section “Control Pan l Functions”

2.The display will read the previously stored settings for the desired function, for example, either with a “-y” or a “-n” as in “P1-y or P1-n”.

3.Press the [Up] or [Down] button to toggle between either the “-y” or “-n” selection for that particular menu function.

4.Press the [Enter] button to store your selection. The display will read “PASS” to confirm your selection

Q-Scan 150 & Q-Roll 150 User Manual 9 2005-11-15/13:23