Chauvet ST-3000LED Operating Instructions, Standalone Mode, Single-FixtureMode, Master-SlaveMode

Models: ST-3000LED

1 16
Download 16 pages 29.77 Kb
Page 10
Image 10
4. Operating Instructions

4. Operating Instructions

The ST-3000LED is a DMX-512 controllable, flash LED panel made up of highly efficient and super bright white LEDs. The ST-3000LED can operate in Stand-Alone, Master/Slave and via DMX-512 control utilizing 3 channels.

STANDALONE MODE

The ST-3000LED can be operated without a DMX controller in a

 

 

 

 

standalone mode. It

 

 

 

 

 

 

 

 

 

 

 

Sound

 

 

 

 

 

 

 

 

 

 

 

Auto

can be operated as a single fixture or together with several other ST-3000LED fixtures in what is

called a “Master/Slave” configuration.

ON

1 2

3

4

5

6

7

8

9 10

 

1

2

4

8

16

32

64

128

256

Option

 

 

Single-Fixture Mode

The ST-3000LED can be set to operate independently of other fixtures or a DMX controller in either a sound-active or automatic mode. A serial data-link is not necessary for this mode of operation and it is recommended that no connection to other fixtures be made at all.

1. Simply choose from any one of 10 built-in “DIP switch Options” from the table below.

Master-Slave Mode

A master-slave mode setup consists of more than one fixture connected in a serial data link without the use of a controller. In a master-slave operation the slave fixtures will synchronize and will behave either identically or in a planned chase pattern to the master unit which must be the first in the serial daisy chain. A Master-Slave ST-3000LED system can consist of an unlimited range of fixtures or at least the number stated to conform to EIA-485 standards.

S e t u p

1.The ST-3000LED sets up automatically for Master-Slave, no DIP-switch settings are required other than for selecting DIP-switch Options.

2.Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the DMX IN input connector of the Slave fixture consisting of a (male) 3 pin connector. Continue the loop from DMX OUT to DMX IN.

Dipswitch Options

Functions

Dipswitches ( ON )

Notes & Description

 

 

 

Sound Active

None

Music: Sound Activated, Rotary knob sets sound sensitivity

 

1

Flash Speed 1

 

2

Flash Speed 2

 

3

Flash Speed 3

Flash

4

Flash Speed 4

5

Flash Speed 5

 

 

6

Flash Speed 6

 

7

Flash Speed 7

 

8

Flash Speed 8

Full On

9

All LEDs full on

Preset Program

10

Preset Programs run in Automatic speed

ST-3000LED User Manual

10

2009-12-10/14:04

Page 10
Image 10
Chauvet ST-3000LED Operating Instructions, Standalone Mode, Single-FixtureMode, Master-SlaveMode, Dipswitch Options