B: closed loop mode:
TRANSMITTERRECEIVER
MIDI OUT | MIDI IN | MIDI IN | |||
|
|
|
| MIDI OUT | |
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: when sending file dump in open loop mode, you should set up receiving mode for the receiver, otherwise receiving is disable
7)When the power voltage is too low ,the display show LOP, now you should check whether the power is OK. It is normal that LOP is appeared for a short while just after power is turned on.
20. MIDI RUN
1)If MIDI data is not received within 10 minutes, the channel and program turned on by MIDI will be cleared.
2)When sending or receiving file dump, the device ID is 55H. All information (include System Exclusive)is sent or received in file dump. You can send SCENE program to storage or another unit, you can also receive SCENE program from storage or another unit.
3)this unit sends or receives NOTE information ,relevant functions is as follows:
NOTE NUMBER | VELOCITY | FUNCTION | ||||||
PROGRAM MASTER | TURN ON/OFF PROGRAM | |||||||
CHANNEL DIMMER | TURN ON/OFF CHANNEL | |||||||
94 |
|
|
|
|
|
|
| FULL ON |
95 |
|
|
|
|
|
|
| DARK |
96 |
|
|
|
|
|
|
| HOLD |
97 |
|
| TURN ON/OFF AUDIO CHASE | |||||
98 |
|
| CHASE |
|
|
|
| SCENES |
|
|
|
| |||||
99 |
|
| DOUBLE | PRESET MODE | ||||
100 |
|
| SINGLE | PRESET MODE | ||||
101 |
|
| STEP CHANGE | |||||
102 |
|
| BLACK OUT |