Safety

Maintenance and Servicing

Procedures not specifically explained in this manual must be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before performing any procedure in this section.

TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:

Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

Cleaning, Maintenance, and Lubrication

Setup

1.BEFORE EACH USE, inspect the general condition of the tool. Check for:

•loose hardware

•misalignment or binding of moving parts

•damaged cord/electrical wiring

•cracked or broken parts

•any other condition that may affect its safe operation.

2.AFTER USE, wipe external surfaces of the tool with clean cloth.

3.WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.

O

Checking and Calibrating the Fence

peration

Maintenance

The Fence holds the workpiece in a fixed position while the Table and/or the blade assembly

are adjusted in a miter or bevel angle.

To make accurate cuts, the Fence must be perpendicular (at a 90º angle) to the Saw Blade.

1.Before beginning work, make a test cut on scrap material with the Table set at 90º.

2.Check the cut with an accurate square. You can also reverse the two pieces, hold the cut ends together, and hold a good straight edge along the side of the pieces.

3.If either test reveals that the cut is not a true 90º angle, adjust the Fence before beginning work.

If Fence needs adjustment:

1.First unplug the tool.

2.Lower the blade assembly and lock it in place using the Head Lockdown Pin.

3.Lay a carpenter’s square on the Table with one edge along the Blade and the other along the Fence. Any inaccuracy should be visible.

NOTE: The square must contact the surface of the Blade, not the teeth, for an accurate reading.

4.The Fence is held in place with bolts at each end. Loosen the bolts slightly, and gently tap the Fence into position using a soft mallet. Retighten the bolts and make another test cut. Repeat the process until the Fence is adjusted accurately.

5.Once the Fence is accurately adjusted, tighten the bolts firmly in place. Recheck one last time, then proceed to work.

Page 14

For technical questions, please call 1-888-866-5797.

Item 61971

Page 13 Page 15
Page 14
Image 14
Chicago Electric 61971 Cleaning, Maintenance, and Lubrication, Checking and Calibrating the Fence, Peration Maintenance
Page 13 Page 15

61971 specifications

The Chicago Electric 61971 is a powerful and versatile tool well-regarded in the woodworking community for its efficiency and precision. This electric planer is designed to meet the needs of both amateur and professional woodworkers, making it a popular choice in various workshops.

One of the primary features of the Chicago Electric 61971 is its robust motor, typically offering around 6.5 Amps of power. This ensures that the tool can tackle a wide range of materials, including hardwoods, softwoods, and plywood. The motor drives the planer at a high speed, allowing for efficient material removal and a smooth finish on surfaces.

The adjustable depth control is another notable aspect of this model. Users can easily set the cutting depth according to their specific project requirements, with options usually ranging from 0 to 1/8 inch. This feature not only provides flexibility but also enables precise adjustments, ensuring optimal results.

Portability is also a key characteristic of the Chicago Electric 61971. Weighing in at a manageable level, it is easy to handle and maneuver, making it a suitable choice for both stationary and on-the-go projects. The ergonomic design includes a comfortable grip, reducing fatigue during extended use and enhancing overall control while operating the tool.

Dust collection capability is integral to keeping the workspace clean and free of debris. The Chicago Electric 61971 often features a dust port that can be connected to most standard vacuum systems. This system helps maintain visibility and ensures a healthier working environment by minimizing airborne particles.

Safety features are not overlooked in this model. The inclusion of a safety switch prevents accidental start-ups, which is essential for protecting the user. Additionally, the guard that covers the blades helps reduce the risk of injury, making it safer to operate.

Overall, the Chicago Electric 61971 combines power, precision, and convenience. Whether used for simple edge planing tasks or more involved woodworking projects, this electric planer stands out for its ability to deliver high performance while accommodating the varied needs of its users. With its balance of features, technologies, and thoughtful design, it is an asset to any workshop, enabling craftsmen to achieve professional results with ease.
Top Page Image Contents