Power tool use and care

yt feSa

etupS

1.Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was designed.

2.Do not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

3.Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

4.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions

to operate the power tool. Power tools are dangerous in the hands of untrained users.

5.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

6.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

7.Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

no

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Rotary Hammer Safety Warnings

atierOp

ce enan Maint

1.Wear ear protectors with rotary hammers.

Exposure to noise can cause hearing loss.

2.Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

3.Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord.

Contact with a ″live″ wire will make exposed metal parts of the tool ″live″ and shock the operator.

4.Let bit cool before touching, changing or adjusting it. Bits heat up dramatically while in use, and can burn you.

5.If the drill bit jams, release the trigger immediately; drill torque can cause injury or break bit.

6.Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact

Harbor Freight Tools for a replacement.

7.Avoid unintentional starting.

Prepare to begin work before turning on the tool.

8.Do not lay the tool down until it has come to a complete stop. Moving parts can grab the surface and pull the tool out of your control.

9.When using a handheld power tool, maintain a firm grip on the tool with both hands to resist starting torque.

10.Do not leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.

11.This product is not a toy. Keep it out of reach of children.

12.People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should:

•Avoid operating alone.

•Do not use with power switch locked on.

•Properly maintain and inspect to avoid

electrical shock.

•Any power cord must be properly grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented –

it prevents sustained electrical shock.

Page 4

For technical questions, please call 1-800-444-3353.

Item 69276

Page 3 Page 5
Page 4
Image 4
Chicago Electric 69276 owner manual Power tool use and care, Service, Rotary Hammer Safety Warnings, Yt feSa EtupS
Page 3 Page 5

69276 specifications

The Chicago Electric 69276 is a versatile and powerful tool that has become a favorite among both DIY enthusiasts and professional woodworkers. This table saw is designed to offer precision, stability, and durability, making it an essential addition to any workshop. Its robust construction is complemented by advanced features that enhance usability and safety, ensuring a reliable performance in various cutting applications.

One of the standout aspects of the Chicago Electric 69276 is its impressive motor. Equipped with a 15-amp motor, this table saw delivers exceptional cutting power, allowing users to tackle a wide range of materials, from softwoods to hardwoods. The motor operates at a high speed, enabling a smooth and efficient cutting experience. Coupled with a 10-inch blade, the table saw can handle rip cuts, cross cuts, and bevel cuts with ease.

The design of the Chicago Electric 69276 emphasizes user comfort and convenience. The table has a large surface area, which provides ample space for handling larger workpieces. The extended table wings further enhance support, ensuring stability during operation. Additionally, the fence system is both sturdy and accurate, allowing for precise measurements and cuts. It includes a quick-release feature, making adjustments and alignment straightforward.

Another notable innovation in the Chicago Electric 69276 is its built-in safety features. The saw is equipped with a blade guard and riving knife, helping to prevent kickback and ensuring a safer cutting environment. Furthermore, the push stick included in the package allows users to maintain a safe distance from the blade while maneuvering smaller pieces.

Mobility is also a key characteristic of the Chicago Electric 69276. While it is a powerful stationary tool, it has been designed with portability in mind. With a compact footprint, it can be easily transported to different job sites or stored away when not in use. The durable wheels and collapsible stand make it effortless to move around.

In conclusion, the Chicago Electric 69276 is a powerful, versatile, and safe table saw that meets the demands of both hobbyists and professionals. With its impressive motor, large cutting capacity, and enhanced safety features, it stands as a reliable option for anyone looking to achieve precise cuts and tackle ambitious woodworking projects. Whether used in a home garage or a professional workshop, this table saw is sure to deliver quality performance and long-lasting reliability.
Top Page Image Contents