Samsung VR10F71UCBC/SW manual Auto Charging, EDGE-CLEANING Side Rotating Brush, Doorsill Crossing

AUTO CHARGING

When the battery is low, the vacuum cleaning robot is automatically guided to the charger to enable it to perform a quick auto charge.

EDGE-CLEANING SIDE ROTATING BRUSH

The edge-cleaning side rotating brush cleans dust from the edges.

DOORSILL CROSSING

About 1cm
Stair type	Vertical type

The vacuum cleaning robot innovative driving system makes it possible for it to cross over doorsills with a height of about 1cm and clean all rooms. The vacuum cleaning robot may not be able to pass a 1cm doorsill depending on the shape of the doorsill.

AVOIDING OBSTACLES

When the vacuum cleaning robot encounters an obstacle while cleaning, the obstacle sensor allows the cleaner to avoid it and continue cleaning. (It may happen that the cleaner touches thin or fi ne obstacles.)

ANTI-FALLING

The 3 Cliff sensors detect downward steps such as stairs or the front door threshold to prevent vacuum cleaning robot from falling down stairs.

SAFETY DEVICE

stop

When the vacuum cleaning robot is lifted up while cleaning, the driving wheels, power brush, suction motor, and side rotating brush are stopped autonati(all) by sensor.

DYNAMIC SIDE BRUSH

When the cleaning robot detects an obstacle, the Dynamic Side Brushes operate. (For a better cleaning result, if a far-away obstacle is detected, the Dynamic Side Brush on the side of the detected obstacle starts to operate fi rst and then as the cleaning robot turns, the Dynamic Side Brush on the other side starts to operate.)

14_ product features