GENERAL LOCATION

1.It is recommended to locate and install the Generator in a protected outdoor area where cooling air is readily available (see previous warning section).

2.Install the Generator so that the air inlets and outlets are not blocked by obstructions such as bushes, trees, or snow drifts. Locating it in the path of heavy winds or snowdrifts may require the placement of a barrier for protection. The air inlet, in normal weather conditions, should face the prevailing wind direction.

3.Install the Generator on a concrete slab or other area where rain drainage or flood waters can not reach it.

4.Generator placement should allow four feet of access to all sides for maintenance.

5.Place the Generator as close as possible to the electrical tools and equipment being powered to reduce the length of extension cords.

6.If the Generator in located indoors, or in a Generator house, the Engine exhaust must be ventilated to the outdoors using professionally installed, leakproof, heat resistant, flexible, metal tubing.

GENERATOR SUPPORT AND MOUNTING

1.Mount the Generator on a concrete slab capable of supporting the weight of the Generator. The slab must extend on all sides beyond the Frame (21) by at least one foot. Contact a cement contractor for slab specifications if necessary. Attach the Frame to the concrete slab using 3/8” diameter masonry type anchor bolts (not supplied).

GROUNDING THE GENERATOR

1.NOTE: It is recommended that only a trained and licensed electrician perform this procedure. (Generators without a permanent installation may not need to be grounded, check local codes and ordinances.)

2.Connect a #6 AWG grounding wire (not included) from the Grounding Point on the front panel to a grounding rod (not included) that has been driven at least 24 inches deep into the earth. The grounding rod must be an earth-driven copper or brass rod (electrode) which can adequately ground the Generator.

(See Figure H, page 15.)

Note: Local codes and ordinances may vary. Always check local codes and install in accord with all laws.

REV 08/04; 11/04

SKU 90300 For technical questions, please call 1-800-444-3353.

PAGE 12

Page 11 Page 13
Page 12
Image 12
Chicago Electric 90300 manual General Location, Generator Support and Mounting, Grounding the Generator, See Figure H
Page 11 Page 13

90300 specifications

The Chicago Electric 90300 is a versatile and powerful tool that stands out in the realm of portable generators, tailored for both personal and professional use. With a design focused on efficiency and reliability, it serves as an ideal solution for applications ranging from home backup power to outdoor activities like camping or tailgating.

One of the main features of the Chicago Electric 90300 is its robust 2,500-watt peak power and a continuous output of 2,500 watts. This capacity is more than sufficient for powering essential appliances such as refrigerators, lights, and other household equipment during outages. It’s particularly valued for its ability to deliver surge power, enabling it to handle higher wattage appliances temporarily without compromising performance.

The generator is equipped with a 7-horsepower, four-stroke engine, which not only enhances its operational capabilities but also promotes fuel efficiency. This engine runs on gasoline, allowing for easy access to fuel and convenient operation. The inclusion of a low oil shutoff feature ensures that the engine stops running when the oil level dips below a certain threshold, thereby extending the generator's life and preventing potential damage.

The Chicago Electric 90300 features a user-friendly control panel, which includes multiple outlets, making it easy to connect various devices simultaneously. The panel typically includes standard 120V outlets, ensuring compatibility with most household appliances. Additionally, some models may include USB ports for charging smaller devices, catering to the modern user's needs.

Portability is another critical aspect of the Chicago Electric 90300. The generator comes with a sturdy frame and built-in wheels, making it easy to transport to different locations, whether for emergency usage at home or during recreational outings. Its lightweight design contributes to its ease of mobility, while the durable construction provides the robustness necessary to withstand different environments.

Noise operation is also a factor to consider. The Chicago Electric 90300 operates at a reasonable noise level, making it suitable for use in residential areas and outdoor settings where quiet is preferred.

In summary, the Chicago Electric 90300 is an efficient, reliable, and user-friendly portable generator that meets a variety of power needs. It combines a powerful engine, generous wattage output, safety features, and portability, making it an excellent choice for those seeking a dependable backup power source or a handy tool for outdoor adventures.
Top Page Image Contents