Chicago Electric 93188 Nameplate, Extension Cord Length, Feet, Symbology, at full load, Amperes

5.If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size.

(See Figure C.)

6.If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.

7.Make sure your extension cord is properly wired and in good electrical condition. Al- ways replace a damaged extension cord or have it repaired by a qualified electrician before using it.

8.Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*

(120 or 240 VOLT)

NAMEPLATE					EXTENSION CORD LENGTH
AMPERES
(at full load)		25 Feet			50 Feet	75 Feet	100 Feet	150 Feet
0 – 2.0		18		18		18	18	16
2.1	– 3.4	18		18		18	16	14
3.5	– 5.0	18		18		16	14	12
5.1	– 7.0	18		16		14	12	12
7.1 – 12.0		18		14		12	10	-
12.1	– 16.0	14		12		10	-	-
16.1	– 20.0	12		10		-	-	-
FIGURE C		* Based on limiting the line voltage drop to five volts at 150% of the rated amperes.
					Symbology
				Double Insulated
				Canadian Standards Association
				Underwriters Laboratories, Inc.
		V~		Volts Alternating Current
			A	Amperes

SKU 93188 For technical questions, please call 1-800-444-3353 Page 8