Maintenance and
Inspection
1.The Armature (25) and Stator (29) comprise the main part of the tool. Protect these electrical components from moisture or oil intrusion.
2.Inspect the Carbon Brushes (34) regularly. Replace them is they are more than 1/3 worn or are chipped or cracked. When handling them, be careful not
to damage them. To reduce wear after inspection, replace them in exactly the same way as they were removed.
3.Regularly inspect all components and fasteners to be sure they are properly installed, not damaged, and tight. Tighten any loose parts. Repair or replace any damaged components.
4.If the tool is damaged or does not function properly, take it to a qualified service technician.
5.Clean the tool after each use, and store it properly. Keep it out of reach of children and other unauthorized persons. Protect it from moisture and corrosive materials.
Page 12 | For technical questions, please call | SKU 93632 |
