FRONT

Switch

Outlets

Operation

Warning: NEVER operate this inverter unless it is properly grounded.

1.Plug the 115 VAC device(s) you wish to power into the 3-prong AC Receptacles. See FRONT above.The appliance(s) must not use more than 1,000 (total) watts during continuous operation, otherwise it may overload the Inverter.

Caution: Some rechargeable appliances may damage the Power Inverter or the appliance. When first using a rechargeable device, check the inverter’s tem- perature for the first 10 minutes. If it becomes abnormally hot, do not use this device with the Inverter.

2.Flip the Power Switch to the ON position to turn on. Do not use the appliance until the switch illuminates.

3.Turn on appliance. If an alarm sound is heard, turn off the appliance.

Caution: It is recommended that the vehicle be started every hour to recharge the battery. Doing this will help prevent any unexpected shutdown of the equip- ment. This will also help ensure that there will be enough battery power to start the vehicle. Due to the risk of carbon monoxide inhalation (see Warning # 22 on page 4), do not run the vehicle’s engine within an enclosed area.

4.After use, disconnect the appliances and flip the Switch to the OFF position.

Maintenance

1.Keep this unit clean and dry. Unplug the unit before cleaning. Clean only the outside of this unit with a soft, dry cloth; never clean this unit with water or harsh cleaners.

2.This device does not contain any user replaceable parts. If it needs service, take it to a qualified technician.

Due to the sensitive wiring and electrical circuits within this device, and the possibility of injury, the fuses inside this unit are to be replaced only by a qualified technician. Also, this unit must have all energy storing electronics discharged BEFORE opening; test for voltage to verify that the unit is safe BEFORE opening.

SKU 94009 For technical questions, please call 1-800-444-3353.

Page 6

Page 6
Image 6
Chicago Electric 94009 operating instructions Operation, Maintenance