| Specifications | |
|
| |
ITEM | DESCRIPTION | |
|
| |
Continuous Power | 1,000 Watts | |
|
| |
Peak Power | 2,000 Watts | |
|
| |
Input Voltage | 12 Volts Nominal DC | |
|
| |
Output Voltage | 120 Volts AC at 60 Hz | |
|
| |
AC Receptacles | (2) Two | |
|
| |
Fuse | 30 Amps, 4 Qty. | |
(internal, for replacement only by a qualified technician) | ||
| ||
|
| |
Dimensions | 131/2" L x 5" W x 23/4" H | |
Weight | 5.6 lbs | |
|
| |
Switch | Rocker type, On / Off, Illuminates to indicate power on | |
|
| |
Thermal Overload | 155° F | |
|
| |
Recommended Input Cord | Battery cable | |
(not included; #2 AWG or larger cables recommended) | ||
| - Modified sine wave with approximately 90% efficiency | |
Features | - Low voltage alarm1 and shutdown2 | |
| 1 at 10.5 V; 2 at about 10 V |
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using this device, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this device!
1.Do not plug in a battery charger if the charger has a warning that dangerous voltages are present at the battery terminals.
2.Keep work area clean. Cluttered areas invite injuries.
3.Keep inverter away from any direct heat source or combustible material.
SKU 94009 For technical questions, please call | Page 2 |
