Charger Specifications, LED Condition | Pride Mobility SilverStar

Basic Operation Instructions

17

CHARGER SPECIFICATIONS

LED	CONDITION
Operating Vehicle Voltage	12.1V - 15.5V DC (Measured at car battery)
Operating Input Voltage	11.5V - 15.5V DC (Measured at charger)
Input Current (RMS):	5.8 Amps maximum
Input Fuse	3AG 7-Amp or ATC 7.5-Amp (Fast Blow)
Output Fuse (One For Each Battery)	4-amp (Fast Blow)
Car Voltage minimum for auto shut-off	12.1-Volts
Maximum Charging Current	2.5-Amps
Onboard LEDs: (2) One For Each Battery	Color: green

www.silverstarmobility.com

Removable Battery Pack

Image 17

Pride Mobility SilverStar manual Charger Specifications, LED Condition

Contents

Removable Battery Pack Safety Guidelines Table of Contents Label Information Product Safety Symbols Label Information Introduction Battery Pack Installation to Exterior Lift Installation Housing. See figure Battery Pack Installation to Backpacker Series LiftsBattery Pack Installation to SilverBoom Ure Harness Connections Battery Charging House Docking Station Charging Battery pack with the In HouseFollow these steps to charge Docking Station It is recommended that Chargerbeconnectedtoacontinuously Backpacker Series/SilverBoom Battery Pack Charging To charge the mobility product’s batteries Mobility Product Battery ChargingBattery Charger LEDs To remove the battery from the pack see figure Battery Replacement To change the fuse in the auxiliary outlet plug TroubleshootingWhat if the battery will not charge? Event the battery pack’s fuse should cease to work LED Condition Charger Specifications Basic Operation Instructions Basic Operation Instructions INFMANU3630