Pride Mobility SilverStar Battery Replacement, To remove the battery from the pack see figure

14 Basic Operation Instructions

BATTERY REPLACEMENT

MANDATORY! Battery posts, terminals, and related accessories contain lead and lead compounds. Wear goggles and gloves when handling batteries and wash hands after handling.

WARNING! Always replace the battery with the exact same type, chemistry, and amp-hour (Ah) capacity. Refer to the specifications table in this manual for recommended type and capacities.

To remove the battery from the pack (see figure 9):

1.Remove the battery pack from the base.

2.Remove the 6 screws from the bottom of the pack.

3.Separate the pack halves.

4.Disconnect the battery leads from the battery terminals and remove the battery.

5.Put a new battery into the bat- tery pack.

6.Connect the battery leads: red wire to the positive terminal (+) and black wire to the negative terminal (-).

7.Put the pack halves back to- gether, reinstall the screws, and tighten.

8.Reinstall the battery pack to the battery pack base.

BATTERY LEADS

SCREW

Figure 9. Battery Replacement

Removable Battery Pack www.silverstarmobility.com