2.Place the saw Base Plate on the material to be cut. Align the front notch (right edge aligns with saw blade) on the cut line.

3.Hold the Circular Saw by both handles. Always keep hands and fingers away from the Saw Blade.

4.Push in and hold the Switch Lock Button, then squeeze the Switch (61) Trigger with the index finger. Do this before the saw blade touches the material.

5.With the saw at full speed, move the saw slowly forward to complete the cut.

6.When the cut is complete, release the Switch Trigger. Do not set the saw down until the blade stops turning.

POCKET CUTS

1.Tilt the saw forward with the cutting guide notch of the Base Plate on the line drawn for the cut.

2.Raise the Blade Guard (20) with the Blade Guard Lever (35).

3.With the Saw Blade just above the material to be cut, start the saw and allow the Saw Blade to come to full speed.

4.Gradually lower the Saw Blade onto the stock using the front end of the Base Plate as a pivot point.

5.When the cutting begins, release the Blade Guard.

6.When the Base Plate is resting flat on the stock being cut, proceed cutting in a forward direction to the end of the cut.

7.When the cut is complete, release the Switch Trigger and wait for the Saw Blade to come to a stop before lifting the saw out of the cut.

8.If necessary, complete the cut from the opposite direction in the same manner described above.

Caution: Never pull the saw backwards since the Saw Blade will climb out of the cut and kickback will occur.

INSPECTION, MAINTENANCE, AND CLEANING

WARNING!

Make sure the Power Switch of the Circular Saw is in its “OFF” position, and that the tool is unplugged from its electrical outlet, before performing any inspection, maintenance, or cleaning procedures.

1.Before each use, inspect the general condition of the Circular Saw. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. If abnormal

noise or vibration occurs, have the problem corrected before further use.

Do not

use damaged equipment.

 

SKU 94245

For technical questions, please call 1-800-444-3353

English

Page 12

 

 

Page 11 Page 13
Page 12
Image 12
Chicago Electric 94245 operating instructions Pocket Cuts, INSPECTION, MAINTENANCE, and Cleaning
Page 11 Page 13

94245 specifications

The Chicago Electric 94245 is a powerful and versatile tool designed for heavy-duty use in a variety of applications. Known for its reliability and performance, this tool has become a favorite among professionals and DIY enthusiasts alike. With its robust construction and innovative features, it aims to deliver both efficiency and precision for every task.

One of the standout features of the Chicago Electric 94245 is its powerful motor. Equipped with a high-performance motor, it provides ample torque and speed, making it suitable for tough materials like wood, metal, and plastic. This capability allows users to tackle a wide range of projects, from woodworking to metal fabrication.

The tool's design prioritizes user comfort and ergonomics. With a comfortable grip handle, it minimizes hand fatigue during extended use, allowing for more seamless operation. The lightweight nature of the tool also contributes to its usability, making it easy to maneuver and handle, even in tight spaces.

In terms of technology, the Chicago Electric 94245 incorporates several key advancements. The adjustable speed settings allow users to choose the optimal speed for different materials, enhancing control and precision. This feature is particularly beneficial for fine applications that require an extra level of care. Additionally, a built-in safety feature helps prevent accidental starts, ensuring a safe user experience.

Another noteworthy aspect of the Chicago Electric 94245 is its durability. Built with high-quality materials, it is designed to withstand the rigors of frequent use. The sturdy construction not only enhances its lifespan but also ensures reliable performance, making it a smart investment for those who need a dependable tool.

Furthermore, the Chicago Electric 94245 is easy to maintain, with accessible components that facilitate routine checks and repairs. This aspect is crucial for long-term usage, as it ensures that the tool remains in optimal working condition.

Overall, the Chicago Electric 94245 stands out in the marketplace for its combination of power, usability, and durability. Whether for professional applications or home projects, this tool offers the features and technologies needed to achieve successful outcomes, making it a valuable addition to any toolbox.
Top Page Image Contents