To Charge 12 V Lead-acid Type Batteries:

Note:Lead-acid batteries can be hazardous. Carefully follow all instructions, safety precautions, and charging procedures as included with the battery you will recharge.

Batteries contain corrosive acid that can cause blindness or severe injury; always wear splash-resistantANSI-approved safety goggles and work gloves when handling batteries. Also, have a nearby area with water and baking soda available to allow you to wash quickly in the event of an emergency. Wash thor- oughly after working on or near batteries.

1.Only start the Generator with no loads attached. Once the Generator is running, with the Charging Plug (60a) disconnected, connect the Charging Battery Clamps (60a) to the terminals (red clamp to positive, + terminal, and black clamp to negative,

– terminal) of the 12 V lead-acid battery to be charged if a regulator is not available. This Generator provides raw output to the battery charging outlet that is not regulated; incorporating an inline regulator is strongly recommended while charging.

2.To start the charging process, connect the Charging Plug (60a) to the Battery Charg- ing Outlet (57a). Do not leave the battery unattended while it is charging.

NOTE: The Generator features a DC Circuit Protector (59a) to protect the DC circuit in case of an overload. Should an overload occur the Breaker will “trip” to its “OFF” position, causing the Generator to automatically shut down and the Pilot Light (56a) on the control panel will shut off to show that the Circuit Protector (59a) has been tripped. This problem may be caused by a defective battery, a large or high capacity battery that needs to be charged by another means, or other problems. Reset the circuitry system by pressing on the Circuit Protector.

3.Periodically disconnect the Charging Plug (60a) and check the battery’s voltage.

Stop charging the battery when the battery’s voltage reaches the manufac- turer’s recommended voltage (typically 13.5 V or less). Overcharging can result in fire, explosion, or serious personal injury. If the battery is not charged enough, reconnect the Charging Plug (60a).

4.Disconnect the plug from the generator’s charging outlet first, then disconnect the clamps from the battery.

SKU 94678

For technical questions, please call 1-800-444-3353.

Page 12

Page 11 Page 13
Page 12
Image 12
Chicago Electric 94678 manual To Charge 12 V Lead-acid Type Batteries
Page 11 Page 13

94678 specifications

The Chicago Electric 94678 is a versatile and efficient tool that stands out in the realm of power tools, particularly for DIY enthusiasts and professional contractors alike. Primarily known as a 7-inch angle grinder, this robust equipment is engineered to handle a variety of tasks, from grinding and cutting to polishing and sharpening. Its powerful performance and ergonomic design make it a popular choice for both heavy-duty jobs and detailed work.

One of the standout features of the Chicago Electric 94678 is its motor capacity. Equipped with a robust 15-amp motor, this angle grinder delivers substantial power for tackling tough materials, including metal and masonry. The motor provides variable speed options, allowing users to adjust the RPM according to the specific requirements of their tasks. This flexibility in speed control is essential for achieving optimal results, whether one is cutting through thick metal or finely grinding edges.

The durability of the Chicago Electric 94678 is another highlight. Built with a rugged housing and designed to withstand the rigors of demanding work environments, this tool is constructed to last. Additionally, it features a spindle lock that facilitates quick and easy wheel changes, allowing users to switch attachments efficiently without requiring additional tools.

In terms of safety, the angle grinder includes protective features that enhance user safety during operation. The protective guard can be adjusted to accommodate different cutting or grinding tasks, minimizing the risk of debris injury. Moreover, the tool is designed with a comfortable grip and lightweight body, reducing user fatigue during prolonged use.

Another noteworthy characteristic of the Chicago Electric 94678 is its compatibility with various accessories and attachments, making it a multifunctional tool. Users can easily attach different grinding wheels, cut-off blades, and polishing pads to expand its capabilities further, making it suitable for a wide range of applications.

Overall, the Chicago Electric 94678 combines power, efficiency, and versatility, positioning it as an invaluable addition to any workshop. Whether for professional use or personal projects, its features and robust design cater to a diverse array of tasks, ensuring it meets the demands of modern-day users.
Top Page Image Contents