Chicago Electric 95004 operating instructions Instructions for putting Into use, Functions

SPECIFICATIONS

Motor	120 V~ / 60 Hz / 10 A; 5,000 RPM
Laser Battery Type	“AAA” (Qty. 2 included)
Saw Blade	7-1/4” Diameter (Included)
	Minimum 5,000 RPM Rating
Maximum Cutting Depth	2-1/2” @ 90° / 1-3/4” @ 45°
Spindle Diameter	5/8”
Base Plate Dimensions	10-5/8” L x 5-5/16” W x 3/8” H
Fence Guide Dimensions	6-1/4” L x 10-3/16” W x 1-1/16” H

CAUTION

LASER LIGHT

DO NOT STARE

INTO BEAM

Max. Output: <1 mW,

Wavelength: 650 nm

CLASS II LASER PRODUCT

This product complies with 21 CFR 1040.10 and 1040.11

CEN-TECH

3491 Mission Oaks Blvd.,

Camarillo, CA, USA, 93011

Manufacture Date:

, ___________

UNPACKING

When unpacking, make sure the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

To prevent serious injury from flying Fragments: Do not use blades made from high-speed steel, abrasive blades, or metal- or masonry- cutting blades. The guards of this saw are not designed to protect against the failure of such blades.

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

Functions

LASER	Trigger (67)	SAFTEY
		BUTTON
SWITCH (74)
LASER
GUIDE

Instructions for putting

into use

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

To prevent serious injury

from accidental operation:

Turn the Trigger of the tool off and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.

1.Safety Button: The Circular Saw is equipped with a Safety Button. To turn the Saw on, first depress the Safety

Button and then pull on the Trigger.

2.Laser Switch (74): The Circular Saw is equipped with a Laser Guide that is designed to aid alignment of the Saw Blade with the cutting line on the workpiece. To operate, push the Laser

Switch to its “ON” or “OFF” positions.

REV 10g

SKU 95004 For technical questions, please call 1-800-444-3353. Page 10