![](/images/new-backgrounds/1114150/11415017x1.webp)
INSPECTION, MAINTENANCE, AND CLEANING
1.WARNING! Make sure the Power Switch is in its “OFF” position and that the product is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
2.BEFORE EACH USE, inspect the general condition of this product. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. Do not use a damaged product.
Maintenance Chart
Maintenance Type | Before | After | Weekly | Monthly | Every 6 | Yearly |
Use | Use | Months | ||||
Inspect product for |
|
|
|
|
|
|
damage | X |
|
|
|
|
|
(see #2, above) |
|
|
|
|
|
|
Wipe off with clean, moist |
| X | X | X | X | X |
cloth |
| |||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
Troubleshooting
Problem |
| Possible Causes |
| Probable Solutions |
Light will not | 1. No power at outlet. | 1. | Check power at Solar Panel (1). | |
turn on | 2. Power Cord (10) not | 2. | Check that Power cord (10) is | |
|
| connected. |
| plugged in. |
| 3. | Light Tube (19) is burned out. | 3. | Replace Light Tube (19). |
| 4. | Solar Panel (1) is damaged. | 4. | Replace Solar Panel (1). |
| 5. | Solar Panel (1) is not getting | 5. | Relocate Solar Panel (1) to a more |
|
| enough sun light. |
| sunny location. |
| 6. | Bad Switch (21). | 6. | Replace Switch (21). |
SKU 95573 | For technical questions, please call | Page |