Chicago Electric 96298 operating instructions SKU For technical questions, please call

Models: 96298

1 14
Download 14 pages 21 b
Page 5
Image 5

“live” wire will make exposed metal parts of the Cordless Driver “live” and shock the operator.

5.Do not use the Cordless Driver or Charger if it has been dropped, damaged, left outdoors, or immersed in liquid.

6.To avoid electric shock, do not pull or carry the Charger by its Power Cord or pull the Power Cord around sharp corners or edges. Do not unplug the Charger by pulling on the Power Cord. Keep the Power Cord away from heated surfaces.

7.To avoid electrical shock, do not handle the Charger, the Adapter, or the Cord- less Driver with wet hands.

8.Keep the Handles of the Cordless Driver dry, clean, and free from oil or grease.

9.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Cordless Driver.

10.Never leave the Charger unattended when it is plugged into an electrical outlet. Unplug the Charger from its electrical outlet before leaving. Place the Charger on a solid surface such as a garage floor; never place on anything flammable.

11.PROPER BATTERY PACK CARE: Battery Pack (19) leakage may occur under extreme usage or temperature conditions. If Battery Pack fluid comes in con- tact with skin, rinse with lemon juice and vinegar then wash with soap and water. If the fluid comes into contact with the eyes, flush with water for several minutes and contact a doctor immediately. Never burn the Battery Pack, as it can explode in a fire. Do not charge the Cordless Driver with a leaking Battery Pack. Contact local solid waste authorities for instructions on correct disposal or recycling of the Battery Pack.

12.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq.)

13.WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

SKU 96298

For technical questions, please call 1-800-444-3353.

PAGE

Page 5
Image 5
Chicago Electric 96298 operating instructions SKU For technical questions, please call