6.Once all parts have been cleaned, turn the Power Switch off and unplug the elec- trical cord.
7.Dispose of the solvent as required by any State, local, or Federal guidelines and regulations. See the directions on the solvent, or contact the local Hazardous
Waste Disposal Authorities.
8.Clean, then store the tool indoors out of children’s reach.
|
| |
| Maintenance And Servicing | |
| Risk of serious personal injury from accidental starting | |
WARNING | ||
or electric shock. Turn the Power Switch of the tool to its | ||
| ||
| “OFF” position and unplug the tool from its electrical outlet | |
| before performing any inspection, maintenance, or cleaning | |
| procedures. |
Damaged equipment can fail, causing serious personal injury. Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
Cleaning, maintenance, and lubrication
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, dam- aged electrical wiring, and any other condition that may affect its safe operation.
2.After Use, clean external surfaces of the tool with clean, moist cloth.
3.WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
SKU 96952 | For technical questions, please call | Page 9 |
