Worklight. Unmodified plugs and matching outlets will reduce risk of electric shock.

b.Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.

c.Do not expose the Worklight to rain or wet conditions. Water enter- ing the Worklight will increase the risk of electric shock.

d.Do not abuse the AC/DC Adapter

Cord. Never use the Cord for car- rying, pulling or unplugging the AC/DC Adapter. Keep the Cord away from heat, oil, sharp edges or moving parts. Damaged or entangled Cords increase the risk of electric shock.

e.If operating the Worklight in a damp location is unavoidable, use a Ground Fault Circuit Interrupter (GFCI) protected supply. Use of

a GFCI reduces the risk of electric shock.

3.Personal safety

a.Stay alert, watch what you are doing and use common sense when operating the Worklight. Do not use the Worklight while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating the Worklight may result in serious personal injury.

b.Use safety equipment. Always wear eye protection. Safety equip- ment such as ANSI-approved safety impact goggles will reduce personal injuries.

c.Prevent unintentional starting. Ensure the Power Switch (10) is in the off-position before connect- ing to power source and/or battery pack, picking up or carrying the tool. Carrying battery operated tools with your finger on the Power Switch or energizing equipment that have the Power Switch on invites acci- dents.

d.Do not overreach. Keep proper footing and balance at all times. This enables better control of the Worklight in unexpected situations.

e.Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

4.Worklight use and care

a.Do not use the Worklight if the

Power Switch (10) does not turn it on and off. Any tool that cannot be controlled with the Power Switch is dangerous and must be repaired.

b.Disconnect the AC/DC Adapter Cord (or Cigarette Lighter Adapter Cord) before making any adjust- ments, changing accessories, or storing the Worklight. Such pre- ventive safety measures reduce the risk of starting the equipment acci- dentally.

c.Store idle battery powered equip- ment out of the reach of children and do not allow persons unfa- miliar with the Worklight or these instructions to operate the tool. Battery powered tools are dangerous in the hands of untrained users.

SKU 98113

For technical questions, please call 1-800-444-3353.

Page 3

Page 3
Image 3
Chicago Electric 98113 operating instructions Gfci reduces the risk of electric shock