Chicago Electric 98113 Inspection, Maintenance Cleaning, Please Read Following Carefully

Inspection, Maintenance,

and Cleaning

1.BEFORE EACH USE: Inspect the general condition of the Worklight. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts and any other condition that may affect its safe operation.

2.BATTERY PACK REPLACEMENT: This Battery Pack is NOT replace- able.

3.CIGARETTE LIGHTER ADAPTER FUSE REPLACEMENT:

A faulty Cigarette Lighter Adapter typically indicates a blown Fuse. To replace the Fuse, unscrew and re- move the Outer Fuse Cap. Remove the Inner Fuse Cap and Spring. Replace the old Fuse with a new F3AL250V Fuse. Then re-install the Spring, Fuse, Inner Fuse Cap, and Outer Fuse Cap. (See Figure B.)

FUSE
(TYPE: F3AL250V)	FIGURE B

	CIGARETTE LIGHTER
	ADAPTER
OUTER FUSE CAP
	(16)
INNER FUSE CAP
SPRING

PLEASE READ THE

FOLLOWING CAREFULLY

The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation

or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/ or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.

4.AFTER USE: clean all external surfaces of the Worklight with a soft, clean cloth. Do not use solvents. Do not immerse the Worklight in liquid.

5.WARNING! If the Cord of the AC/DC Adapter (17) or Cigarette Lighter Adapter (16) are damaged, they must be replaced only by a qualified service technician.

SKU 98113 For technical questions, please call 1-800-444-3353. Page 9