ENGLISH

Maintenance

After finishing a recording

At the end of a recording, you must remove the power source.

When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery. Hence, it should be removed.

After completing a recording session

1. Slide the TAPE EJECT switch in the direction of the arrow.

1

Opening the cassette door ejects the tape automatically.

REV

Please wait while the tape is completely ejected.

S.SHOW

 

FWD

2. After removing the tape, close the door and store the camcorder in a dust free

DELETE

environment.

 

Dust and other foreign materials can cause square-shaped noise or jerky

3

images.

MEM

 

3. Set the power switch to the OFF mode.

OFF

MEM/P

 

4. Disconnect the power source or remove the Lithium Ion Battery Pack.

When disconnecting a power supply, remove it in reverse order, by referring to page 21.

Hold down the BATTERY RELEASE button and slide the battery pack in the direction of the arrow.

2

4

92

Page 92
Image 92
Samsung VP-D380, VP-D340 manual Maintenance, After finishing a recording, After completing a recording session