ENGLISH

Advanced Recording

DATE/TIME

The DATE/TIME function works in CAM, VCR, M.REC and M.PLAY modes.

The date and time are automatically recorded on a special data area of the tape.

1.Press the MENU button.

The menu list will appear.

2.Turn the MENU DIAL to highlight VIEWER and push the MENU DIAL.

3.Turn the MENU DIAL to highlight DATE/TIME.

4.Push the MENU DIAL to select the sub-menu.

5.Using the MENU DIAL, select the DATE/TIME mode.

You can choose between - the OFF, DATE, TIME and DATE/TIME modes

OFF only

DATE only

TIME only

DATE & TIME

To return to the previous menu, highlight DATE/TIME in the middle of the menu and push MENU DIAL.

CAM MODE

INITIAL

CAMERA

A/V

MEMORY

VIEWER LCD ADJUST

DATE / TIME TV DISPLAY

CAM MODE

VIEWER SET

LCD ADJUST

DATE / TIME

TV DISPLAY

6. To exit, press the MENU button.

Notes

The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button.

The DATE/TIME will read “- - -” in the following conditions.

-During playback of a blank section of a tape.

-If the tape was recorded before setting the DATE/TIME in the Camera’s memory.

-When the battery becomes weak or dead.

Before you can use the DATE/TIME function, you must set the Clock.

CAM MODE

VIEWER SET

DATE / TIME

DATE

TIME DATE&TIME

52

Page 52
Image 52
Samsung VP-D380, VP-D340 manual Date/Time, Date & Time