Samsung VP-D380 System requirements, Recording with a DV connection cable VP-D340i/D380i only

ENGLISH

IEEE 1394 Data Transfer

●System requirements

■CPU : faster Intel® Pentium IIITM 450Mhz compatible.

■Operating system : Windows® 98SE, ME, XP, Mac OS

■Main memory : more than 64 MB RAM

■IEEE1394 add-on card or built in IEEE1394 card

Recording with a DV connection cable (VP-D340i/D380i only)

1.Set the power switch to VCR mode.

2.Connect the DV cable (not supplied) from the DV IN/OUT port of

the camcorder to the DV IN/OUT port of the other DV device. ■ Make sure that DV IN appears on the screen.

3. Press the START/STOP button to begin REC PAUSE mode. ■ PAUSE is displayed on the OSD.

4.Start playback on the other DV device while you monitor the picture.

5.Press the START/STOP button to start recording.

■ If you want to pause recording momentarily, press the START/STOP button again.

6.To stop recording, press the (STOP) button.

Note

■When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven, however recorded pictures will not be affected.

72