approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq.)
6.Cleaning may produce Aluminum Oxide dust which can cause eye, skin or breathing irritation. Always use a NIOSH approved respirator, safety goggles and rubberized gloves when operating this tool.
7.Always use water based solvents when operating this tool. Water based solvents have a pH greater than 7. Use of other types of solvents may cause injury.
8.DO NOT use any highly flammable, volatile or combustible solvents such as gasoline, kerosine, etc. in this tool.
9.Parts being cleaned may deposit oil, grease, gasoline or other combustible contaminants in the tool. Check for volatile fumes, and use this tool only in a
10.WARNING: Chlorinated solvents such as
11.WARNING: Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (Califor- nia Health & Safety Code § 25249.5, et seq.)
12.The warnings, precautions, and in- structions discussed in this instruction
manual cannot cover all possible con- ditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Save these instructions.
Grounding
To prevent electric shock
and death from incorrect grounding wire connection: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
SKU 98332 | For technical questions, please call | Page 5 |
